Application: With Collall Transfer Medium you can place self-printed images on all kinds of objects and materials. Suitable for textiles, ceramics, glass and wood.

Appearance:

• Thin white liquid

Solvent: Water

Main component: Acrylic

Natural ingredients: 50%

Viscosity: 300 mPa.s

pH: 7

Density: 1.06 kg/dm3

CE: –

Typical use: 175 g/m3Textile treated with Transfer Medium.

Use:

1. Print image with laser printer in mirror image. Cut out the image generously, leaving approx. 3 mm around it.
2. Using a soft brush or sponge brush, generously coat the front of the print with Transfer Medium.
3. Stick the print (image down) on the object (e.g. t-shirt) and press well. Remove excess adhesive immediately with a damp cloth. Allow to dry thoroughly, at least 12 hours.
4. Moisten the paper well with cold water and let it soak for about 10 minutes.
5. Gently rub off the wet paper layer with your fingers. The image will now be visible, let it dry well. Finish the image with Transfer Medium, fine paper remnants (white haze) disappear and it gives a beautiful end result.
6.  Can be hand washed up to max. 30 °C.

Allergens: Contains CMIT/MIT and 1,2-benzisothiazol-3(2H)-one. May cause an allergic reaction.

Suitable for: Ages 8 and above.

Cleaning:

• Tools can be cleaned with water, only when the glue is still wet (a synthetic detergent can be added to the water if necessary).
• Soak spots of glue that have dried in warm water and then remove with a brush.