Application: With Collall Cork Glue you glue cork and wood (laminate) for indoors and (in protected places) outdoors.

Appearance:

• Thick white glue
• Dries transparent
• Quick drying
• D3 – EN204 water resistant

Solvent: Water

Main ingredient: Polyvinyl acetate

Natural ingredients: 50%

Viscosity: 12.000 mPa.s

pH: 3

Density: 1.10 Kg/dm³

CE: –

Typical use: depending on the absorption of the materials to be glued, approximately 200 – 250 grams per m2, applied on one side.

Use:

• The materials to be bonded must be dry and free of dust and dirt.
• The glue can be applied on one or both sides. Easy to apply with a glue brush or spatula.
• Let it dry for a while and then firmly press both adhesive surfaces together. The glue can possibly be diluted with water, but this will affect the drying time of the glue.

Allergens: contains CMIT/MIT. May produce an allergic reaction.

Suitable for: Ages 6 and above.

Cleaning:

• When the glue is still wet, the tools can be cleaned with water (if desired, a synthetic detergent can be added to the water).
• Traces of the glue that have dried should be soaked in warm water and then removed with a brush.
• Remove wet glue stains immediately with a damp cloth.
• Dried glue stains can only be removed mechanically.