Application: with Collall Styrocoll you glue polystyrene/styrofoam. Can also be used for glass, stone, ceramics and various plastics. For hobby, office and school.

Appearance:

• Clear transparent liquid
• Strong bonding
• Quick drying
• Strong odor (acetone)

Solvent: Acetone/ethanol

Main ingredient: Polyvinyl acetate

pH: –

Density: 0.90 kg/dm³

CE: –

Typical use: approx. 100 grams per m2, glued on one side.

Danger! Contains acetone.

Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapours. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. Dispose of contents/container to a collection point for chemical waste.

Warning: the glue can damage painted materials. Store in a well-ventilated place. Keep the container tightly closed.

UFI: U6F7-4TYV-1W20-9KSG

Use:

• The materials to be bonded must be dry and free of dust and dirt.
• Apply directly from the bottle to the surface and spread with a spatula or brush if necessary.

Allergens: –

Suitable for: ages 6 and above (accompanied by an adult).

Cleaning:

• Stains can be removed with a generous amount of acetone. Because some dyes and synthetic fibers are not resistant to this, try this first on a non-visible place.
• A stain can also be removed from (clothing) fabrics with paper with one rough side. Place the paper with the rough side on the stain and go over it with a lukewarm iron. The glue melts and soaks into the paper. Repeat this treatment if necessary. Do not exceed the maximum
• Ironing temperature of the fabric in question with the iron.